Three Unique Features, 1 Superior Seal

Easy-Fit Tough Design
When designing the e-Barrier seal we wanted to eradicate the largest reason for premature seal failures— Installation damage. We have done this by designing the stiffest profile and using the thickest steel ever used for a seal, right at the front face. The rubber OD beads allow for the minimum fitting force required, and the low friction barrier ensures maximum transmission of the fitting forces to the Seals OD.

Low Friction Bumper
The Low Friction bumper performs 2 major functions which other seals simply have not got. Firstly, the bumper transmits the fitting force from the front of the seal to the Seal OD in a far more efficient manner than any other seal. Most other seals have a rubber bumper, which acts like a brake, thus increasing the required torque, creating excessive temperatures, and ultimately more fuel to turn the seal. This can last a few hundred hours until the rubber eventually goes hard. Secondly, the bumper acts as the first contacting defense against dirt ingress, as part of the multi-zone labyrinth protection system.

Multi-zone Labyrinth
Using the latest labyrinth technology, the e-Barrier seal provides the best protection and the lowest friction on the market. The combination of low profile section right angle corners, low friction barrier, two rubber wipers and a specifically formulated water proof grease to both lubricate and keep water out, ensures this is the best seal at keeping dirt , grit water and ice out on the market.